Clutch hose assembly What are the preventive measures for car oil pipes according to manufacturers?

　　Preventive measures for automotive oil pipes. The adhesive heat shrink tubing is mainly used for the safety protection of automotive oil pipes. There are two types of inner tubes: SBRSM with adhesive inner wall and RSFRM without adhesive inner wall. The SBRSM inner tube with adhesive inner wall is made of polyolefin material and environmentally friendly hot melt adhesive layer, while the RSFRM inner tube without adhesive inner wall is made of polyolefin material. It is widely used in the insulation protection of low-voltage power projects, mechanical equipment strain buffering and damage prevention. The product has the advantages of insulation, sealing and moisture-proof (adhesive inner wall), softness, self-healing surface, and environmental protection.

　　What is the method for checking automotive oil pipes? If your car breaks down on the road and cannot be started, call for a tow truck or mechanic. If the wait is too long, you can check the oil pipes and oil tank yourself. If the problem is with the oil pipes, troubleshoot it. When checking the oil pipes and oil tank, remove the oil pump inlet pipe connector with a wrench and use suction to check if the oil pipe is blocked (but be careful not to suck gasoline into your mouth). If oil is sucked out, the problem is not in the oil pipes or oil tank, but possibly the oil pump. If no gasoline is sucked out, the problem may be with the oil tank or oil pipes. This method can be used as a reference for further checking oil leaks.

　　If no oil is sucked out, first check if there is enough oil. If the problem is not a lack of oil, then there is an oil leak or blockage in the oil pipe.

　　Clutch hose assembly manufacturers provide the following solutions for automotive oil pipe oil leaks:

　　1. If the oil pipe is broken, find a rubber or plastic hose with an acceptable diameter and connect it. If the connection is not tight enough, use thin wire to bind both sides to prevent oil leakage.

　　2. If the oil pipe is cracked, clean the cracked area, apply soap, wrap the cracked area with silk ribbon or tape, bind it with thin wire, and then apply another layer of soap.

　　3. If the oil pipe joint is leaking, wrap pure cotton yarn around the outside of the joint, then tighten the oil pipe nut and oil pipe connector; or chew gum or malt sugar into a paste, apply it to the oil pipe nut seat, and let it dry and solidify to achieve a sealing effect.

　　4. If the oil tank is damaged, causing oil leakage, clean the leaking area and apply soap or chewing gum to the leaking area for temporary blockage. For larger leaks, flatten the heat dissipation core copper tube with needle-nose pliers.