Clutch hose assembly -The clutch pump is installed on the transmission, and the clutch pump is installed at the front end of the clutch pedal. The general service life of the clutch pump is 2 years or 60,000 kilometers. The clutch master pump refers to the part connected to the clutch pedal and connected to the clutch booster through an oil pipe, which collects pedal stroke information and plays a role in separating the clutch through the action of the booster. A detailed explanation is provided below.

　　Clutch hose assembly: What is the function of the clutch pump?

　　1. The clutch master pump is the part connected to the clutch pedal and connected to the clutch booster through an oil pipe, collecting pedal stroke information and separating the clutch through the action of the booster;

　　2. When the clutch pedal is depressed, the push rod pushes the master pump piston to increase the hydraulic pressure, which enters the sub-pump through the hose, pushes the release fork, and pushes the release bearing forward;

　　3. After releasing the clutch pedal, the hydraulic pressure is released, and the release fork gradually returns to its original position under the action of the return spring, and the clutch is engaged again.

　　The clutch booster pump converts the force generated by the clutch pedal into hydraulic pressure, outputs it to the clutch booster pump, and the clutch booster pump converts the hydraulic pressure into thrust, pressing the clutch release bearing to separate the clutch.

　　Clutch hose assembly-The clutch master pump is the part connected to the clutch pedal and connected to the clutch booster through an oil pipe, playing a role in separating the pedal through the action of the booster.

　　After the driver depresses the clutch, the push rod pushes the piston of the master pump, the oil pressure increases, enters the sub-pump through the hose, pushes the release fork, pushes the release bearing forward, and the driver releases the clutch pedal, releasing the generated oil pressure and thus releasing the hydraulic pressure.

　　The clutch is a commonly used part in mechanical transmission and can separate the vehicle's transmission system at any time. However, automobiles have requirements for the operation of the clutch. When shifting gears while driving, the clutch requires smooth engagement and quick separation. The clutch must have good wear resistance and heat dissipation.

　　Clutch hose assembly-The master and slave pumps of the clutch have the same principle as the automobile brake separation pump, using hydraulic principles to separate the clutch.

　　Clutch hose assembly-Commonly used clutches in automobiles are divided into two types: insert type and friction type.

　　Clutch pump replacement method

　　1. Remove the lock clip. Remove the push rod retaining pin and push rod;

　　2. Remove the hose clamp from the master pump. Disconnect the master pump hose

　　3. Remove the master pump oil pipe. Removal of the clutch master pump nut;

　　4. Remove the clutch master pump; replace it with a new pump body.